How To Fix A Noisy Electric Fire (A DIY Guide)
You can fix this common problem at home. Our guide shows you everything you need to make your electric fire less noisy.
In order to reduce the noise of an electric fire, one must tweak several components until the sound disappears. The main components that need to be looked at include the tubes, blower, motor, fan belt, and limit switch.
This is not as hard as it might sound! Our guide will show you step-by-step how to check each component and return that quiet fire you love and miss!
How To Fix An Electric Fire Making Too Much Noise
Electric fireplaces are handy in so many ways. During the colder seasons, they can heat a room faster than fireplaces that burn logs. They are also safer than fireplaces that rely on gas or firewood. This is because there is no open fire or the need for chimneys and venting. They don’t produce carbon monoxide fumes and you can leave the fire on without worrying.
The best part? They are user-friendly. Instead of gathering wood and starting a fire like a cave person or having to refill the gas, you can simply flip a switch to activate the electric fire.
Electric fires usually operate silently, but after some time, perhaps due to years of use, it is not uncommon to start hearing some noises from the fireplace. No need to panic, try checking the following components to eliminate the noise.
- Tighten the hardware connections.
- The tubes.
- The blower.
- The fan belt.
- The motor.
- The limit switch.
Find all the instructions you need on how to wire an electric fire into a fused spur.
Tighten The Hardware Connections
Before we start, always remember to ask the help of a professional if you are not sure about fixing the fireplace yourself. If your electric fireplace is still under warranty, then find out if you need to hire a professional as well. It is very common for a company to cancel a warranty the moment they find out the owner tweaked an appliance.
Back to those connections!
Loose hardware connections can certainly cause noise in your electric fireplace. The first thing to do when you notice any kind of unnatural sounds is to check whether the screws of the fireplace are held tightly in place. Loose screws are usually very chatty! Should you find that the screws are not solid then use a screwdriver to tighten them up. If this was the cause, then the noise should go away the next time you switch on the fireplace.
But if you checked and tightened the screws and the noise is still there, it might be time to check the tubes.
Electric fireplaces also switch themselves off. If that’s your issue today, learn more about why your electric fireplace keeps switching itself off and how to fix it.
How To Check The Tubes For Sounds
Another common cause for noisy electric heaters is the tubes that connect all the equipment. When they are shaped right, everything’s quiet but sometimes they bend and that’s when they get noisy. A simple check on their shape should tell you whether the tubes are behind the sounds plaguing your evenings. If the tubes are bent even slightly, you use a hammer to straighten them back in place. Do this gently so as not to damage them.
How To Check The Blower For Sounds
Over time, the fan or blower of the fireplace tends to accumulate a lot of dust and lint. If the first two steps haven’t solved the noise problem, then the next step is to clean out the blower. This is very simple. Simply use a dusting cloth to clean the area and if dirt was the issue, your electric fireplace’s blower will work now work quietly.
Up for a real DIY challenge? Find out how to convert a wood-burning fireplace into an electric fireplace.
How To Check The Fan Belt For Sounds
After a few months or years, the fan belt’s rod tends to wear out and stick. This is one possible way that the fireplace will produce a squeaking noise. The best thing to do here is to lubricate the belt using industrial oil. Open the back of the fireplace panel and oil the rod and that should banish the squeaking sounds. Alternatively, you can just replace the rod.
How To Check The Motor For Sounds
As the fireplace’s motor also gets old, the noise it makes is distinctive. When the noise in your fireplace has a grinding sound, then the chances are that the motor is nearing the end of its lifespan. The best thing to do is to replace the motor or the speed control. Check with the manufacturer’s guide to replace the motor.
Keep your electric fireplace in top shape by grabbing our free guide on how to take care of an electric fireplace.
How To Check The Limit Switch For Sounds
After repeated being turning on, overloading and shutting down, the limit switch may wear out. This can make the fireplace produce a noise that can be pretty annoying. To fix this issue, open the whole unit and look for a pair of round discs with two wires. Replace them and see if the problem is fixed.
These are the best electric log burners.
A Quick Summary On How To Fix A Noisy Electric Fireplace
- Electric fireplaces are a popular choice for those who do not want a complicated or dangerous fireplace.
- When an electric fireplace makes a noise, there are several known causes that an owner can systematically check.
- The main causes include loose hardware like screws, bend tubing, a blower full of dust, the fan’s rod is malfunctioning, or the motor or limit switch has reached the end of their years.
- Most causes can be fixed at home simply by tightening, oiling, cleaning or straightening the parts wherever needed. But the motor and limit switch must be replaced when it malfunctions.