How To Install A Wall-Mounted Oil-Filled Radiator?

Wall-mounted radiators came as an alternative relief to the traditional central heating radiators. Unlike their traditional counterparts, these ones can actually be installed with simple DIY knowledge and you do not have to involve a professional.

Since you spend less time and money in the installation of a wall-mounted oil filled radiator, it has become one of the most popular form of installing a heating system in the home.

In this article, we are going to share the step by step procedure of installing a wall-mounted oil-filled radiator.

Things you need

Here’s what you are going to need before you begin the actual installation:

  • A screwdriver
  • A 6mm-8mm drill bit
  • Pencil
  • Safety goggles
  • Hammer drill

Once you have assembled all the requirements into a central location, you can start off the installation procedure. Below are the steps.

Step One: Draw markings on the wall

Assuming you have all you need to carry out the installation, the first step should be deciding the exact place on the wall where you intend to install the radiator. Once you have made this decision, start off by marking the wall with the help of a template to draw the position of the radiator. Don’t worry, the template is usually supplied together with the radiator in the package.

How To Install A Wall-Mounted Oil-Filled Radiator?

Step two: Drilling

The second step is to drill four holes on the marked space. To do this, first inspect the place you intend to drill to ascertain that there are no pipes or electric cables running underneath. Once you have established the absence of pipes and cables, use the template once again to mark where you are going drill the four holes. After that, attach the drill bits and before you start the actual drilling, put on the safety goggles. The goggles need to be worn the whole time you’ll be drilling.

Step three: Install the mounting brackets

After the four holes have been drilled in the right position, fix the wall plugs and then align the mounting brackets with the holes ready followed by the screws. Now use the screw driver to hold the brackets securely on the wall.

Step four: Putting the radiator in place

Once the brackets have been held securely on the wall, it is time to hang the radiator on to them. Make sure the radiator is horizontally positioned and not tilted at all.

Step 5: Screwing in the safety screws

At this point, you are almost done with the entire process. Safety screws are not always provided in the package but for most of electric wall-mounted radiators, they are present. The safety screws ensure the radiator is firm and sturdy on the brackets. They are usually fastened from the top of brackets and you can always tell if the radiator is firm enough based on the resistance on the screwdriver when you are screwing in the safety screws.

Step six: Plugging in the oil-filled radiator

The oil-filled radiator comes with an electric cable that is approximately 1.5m long. After installing the radiator to the wall brackets, plug it into the nearest 13-amp socket and then turn it on.

As you can see, the installation process for a wall-mounted oil-filled radiator is pretty simple and can take less than 10 minutes at most. What is more, you don’t really need to have professional skills to do it and you can get everything done all by yourself. Just be sure to observe all the safety precautions and everything will be smooth. Please note that some models may have a slightly different installation procedure but the difference is going to be almost negligible.

Related Topics To Read Next

No Water In Radiator? Here’s Why

Leaking Towel Rail or Radiator? Try This

Towel Radiator Not Working? Try This

Radiator Won’t Turn Off? Here’s Why

Leaking Radiator Bleed Valve? Here’s Why

No Bleed Valve on Radiator? Here’s What to Do

Copper Pipe in Concrete – Yes or No?

Radiator Crackling & Other Noises

How Much Water In a Radiator?

Radiator Rattling? Here’s Why

Broken Thermostat or User Error? Let’s Find Out

Hot Water Tank not Heating? Here’s Why

Vaillant Boiler Temperature Settings

Sabre Boiler Red Light On – Why?

Honeywell ST9400C Problems & Fixes

Turn Off hot Water Supply: How To

About the Author Harry Thompson

Involved in home renovations throughout his life, Harry is an expert in everything to do with home and garden DIY. In his spare time, he enjoys cooking and tending to his garden.