How To Remove No More Nails Adhesive

This is a tricky topic. No More Nails is an adhesive made by Unibond that’s designed to, well, make it so you don’t need to use nails. It’s extremely strong when used properly, making its removal much more difficult than, say, wood glue. Generally used to secure heavy objects to things that can’t safely have nails or screws in them, it’s strong. That means that knowing how to remove No More Nails will serve you well if you plan to use it.

How to remove No More Nails? Do it with a combination of heat, a blade, and mineral spirits.

This isn’t a super complicated topic, so it shouldn’t be a super long one today. Let’s get right into it!

No More Nails – What, Why, and How?

First things first – what exactly is No More Nails? As mentioned in the introduction, it’s a specialised adhesive. It’s specifically designed to attach to porous materials, such as:

  • All wood
  • Most plastic (not PE, PP, or Teflon)
  • Brick
  • Ceramic
  • Plaster
  • Glass
  • Skirting boards
  • Dado rails
  • coving
  • Architraves
  • Polystyrene mouldings (one surface must be porous)

It’s great for DIY projects that require a strong attachment, without the use of traditional mechanical attachments, such as nails and screws. It’s generally safe and easy to use (like most adhesives), and has incredibly high bond strength. One reviewer said:

I used this product to glue a thin plastic sheet to a piece of old chip wood from the 80’s just to keep it from falling apart. It worked, and if I was to pull the plastic sheet from the wood, it would split and destroy before the glue will let go. The glue dried in about 20 hours.

My other job, I used this glue to stick a small tab of metal to a metal table. It would stick, but can be pulled off with medium force. In comparison, I used some old kitchen silicone sealant to do the same and it is stuck on there and almost is impossible to remove without ripping my finger nails off. I guess it depends on what you are sticking, for me old wood with many grip points and a clean non smooth surface seems to be the best for glue to bite into. Smooth surfaces not too great.


AstroblemeYT

So we know why and how to use it – but how do you get it off? Well, that’s simultaneously easy and a bit complicated, depending on what it’s attached to.

How to Remove No More Nails

This is going to require a bit of finesse and attention, but it won’t be actively hard, per se. To remove No More Nails, you’ll need the following:

  • A utility knife
  • Heat gun or hairdryer
  • Mineral spirits & rag
  • Hands – you do have those, right?

Now – how to remove the adhesive? Do the following:

  1. Using a heat gun, soften the adhesive. Depending on the surface, this may require a bit of extra love and attention.
    1. I.e. glass will require more care than wood, same with ceramic vs. plaster.
  2. Scrape the adhesive off as much as possible with your utility knife.
  3. Repeat steps 1 and 2 until it’s fully removed.
  4. Soak a rag with mineral spirits and wipe the area. This will remove any remaining residue and allow you to continue as desired with the surface in question.

If you have No More Nails strips, on the other hand, things change. For the uninformed, these are essentially Command strips on crack – they will hold most things that No More Nails will in glue form. To remove No More Nails strips, simply grab one end and twist. It should pull away from the surface with minimal effort.

Final Thoughts

No More Nails is an awesome adhesive when used on the proper material. Surfaces like metal and Teflon won’t take well to it, but porous surfaces will hold that sucker like nobody’s business. Trying to remove it by hand is a surefire way to have sore hands and a still-glued surface. Instead, use the method above.

Heat the adhesive gently, scrape it with a utility knife, and repeat until it removes. Once done, wipe the area with a mineral spirit soaked rag to remove any leftover residue and clean up. Be sure to pay attention to the medium to which the adhesive is applied. If it’s on glass or ceramic, you need to be extra careful with all of the above steps to prevent scratching or breaking the surface.

Related Topics To Read Next

Furniture Out of Pallets – What, Why, how

Can You Drill Into Concrete Fence Posts? [SOLVED]

Window Handle Stuck? Here’s Why

Dot and Dab Thickness and How to Apply

Render a Stone Wall: What, Why, How?

Building a Fence on a Wall (Retaining Wall)

Straw Walls: Good Idea or Not?

Gravel Board Retaining Wall – Yes or No?

Ring Doorbell on uPVC Door – How and Why

How to Get Paint Off uPVC

How to Remove a UPVC Door & Other Tips

Green Mould on Skirting Boards? Here’s Why

Porch Insulation: What, Why, How

Polystyrene Loft Insulation – Yes or No?

Socket Height Above Worktop: What to Know

Damp Floorboards? Here’s Why

About the Author Harry Thompson

Involved in home renovations throughout his life, Harry is an expert in everything to do with home and garden DIY. In his spare time, he enjoys cooking and tending to his garden.